An Easy Guide to Syringes, Swabs & Prints

Mushrooms may enable us to comprehend further

Mushrooms are the gateway to the cosmos, and understanding their life cycle opens up infinite possibilities.

– Terrence McKenna

What are mushroom spores?

Spores are unicellular reproductive units capable of developing into a new organism, functioning similarly to seeds in plants _[1]. Unlike seeds, spores lack a stored food supply and require specific environmental conditions to germinate. Mushroom spores are produced in vast quantities by the gills, pores, or teeth on the underside of a mushroom's cap. When mature, these spores are released into the environment, where they disperse and potentially germinate into new mycelium, the vegetative part of the fungus.

The study and utilisation of mushroom spores are central to both scientific mycology and practical mushroom cultivation. Collecting, storing, and using spores requires a clear understanding of their biology and the methods by which they can be handled without contamination _[2].

Mushroom Spore Prints

A Mushroom Spore Print

Spore prints are a collector's archive, a record of both the past and the future of cultivation.

– Brian Starkey

What Are Spore Prints?

A spore print is a collection of mushroom spores released by a mushroom cap onto a surface, such as paper, aluminium foil, or glass _[1]. The pattern of the spore print reflects the arrangement of the gills or pores of the mushroom, and the colour can be a distinguishing feature for identifying species. Spore prints are extremely versatile and commonly used for species identification and as a starting material for mushroom cultivation.

How to Make a Sterile Mushroom Spore Print at Home

Creating a sterile spore print is a meticulous process that requires careful attention to hygiene and environmental conditions.

Preparation: Begin by cleaning the workspace thoroughly with disinfectants to reduce airborne contaminants. It is recommended to work in a still air box or near a laminar flow hood to minimise exposure to airborne microorganisms. Still air boxes are more than adequate and it’s good practice to hone SAB techniques before moving to a laminar flow hood _[3].

Sterilisation of Equipment: Tools such as scalpels and tweezers should be sterilised by heating them until red-hot and wiping them down with 70% isopropyl alcohol. The surface on which the spore print will be made should also be sterile. The aluminium foil can be flame-sterilised or put inside a jar and autoclaved/pressure cooked.

Spore Collection: Choose a mature mushroom cap with fully developed gills. The cap should be fresh and free of visible contaminants. After cutting the stem close to the cap, place it gill-side down on the sterilised surface. Cover the cap with a sterilised glass or bowl to prevent contamination. Using a jar is good practice as it isolates the print. Leave it undisturbed for 12-24 hours to allow the mushroom spores to drop.

Storage: Once the spores have been deposited, carefully lift the cap without disturbing the print. Cover the print with another piece of sterilised foil or paper and store it in an airtight container. Spore prints can be stored in a cool, dark place for several years if kept dry.

What can I use a spore print for?

Mushroom spore prints are not only valuable for species identification, but they also serve as a foundational element for creating spore syringes or inoculating substrates directly. When used for cultivation, the mushroom spores from a print can be scraped into water to create a spore solution or transferred directly to an agar plate to start a mycelium culture.

Mushroom Spore Syringes

The spore syringe is the cultivator's scalpel, delivering life to a prepared medium with exacting control.

– Paul Stamets

What Are Spore Syringes?

A spore syringe is a sterile solution containing mushroom spores suspended in water. We’d recommend distilled water for purity and quality _[4]. This method is widely used in mushroom cultivation because it allows for precise inoculation of substrates. Unlike a liquid culture, the spores in a syringe are not germinated. In some cases the spores will germinate themselves inside sterile water although this would normally happen over a longer period of time.

Mushroom Spore Syringes are an effective and popular method to isolate strains

How to Make a Sterile Mushroom Spore Syringe at Home

Creating a spore syringe requires additional equipment but follows a similar sterile technique:

Sterile Workspace: As with other methods, maintaining a sterile environment is critical. A still air box or laminar flow hood is recommended for this process. Thoroughly clean down the work area with isopropyl alcohol _[3].

Syringe Sterilisation: Use a new, sterile syringe or sterilise one by drawing boiling water into it several times and allowing it to cool. If you have an autoclavable syringe then you can sterilise it in the pressure cooker _[5].

Spore Solution Preparation: If using a spore print, scrape some mushroom spores into a sterile glass of water. If using a swab, swirl the spore-covered end in the sterile water. Ensure the water is distilled and free from contaminants to avoid introducing unwanted organisms into your syringe. An added tip would be to wipe the edges of the spore print and the centre circle with H₂O₂ (Hydrogen Peroxide.) This will sterilise the surface of the foil or medium you are using but will not harm the spores excessively yet reduce unwanted contamination.

Filling the Syringe: Sterilise a needle with a flame until it glows red. Try and work across the needle to ensure sterility down its length. Draw the spore-laden water into the syringe carefully. Do this evenly without drawing in any unwanted air bubbles. Cap the syringe and store it in a clean, sealed container _[5].

Storage: Store the syringe in a cool, dark place like a fridge until you are ready to inoculate your substrate. Spore syringes have a shelf life of several months if kept in proper conditions. In some instances they have been known to last for years _[5].

Uses of Spore Syringes

Spore syringes can be used to inoculate a substrate such as grain jars or bags. The water suspension allows for even distribution of spores throughout the substrate, promoting uniform colonisation. Spore syringes are also used to inoculate liquid culture media, which can then be expanded to produce large quantities of mycelium for further cultivation. For scientific study, mushroom spores can be placed on a slide and viewed under the microscope. This will allow you to examine the health, shape, colour, spot contamination and generally observe the spores in more depth.

Mushroom Spore Swabs

Extracting Spores with a Swab from a Mushroom

For those rare finds, spore swabs are a treasure map to the hidden gems of the fungal kingdom _[4].

– Simon Olsen

What Are Spore Swabs?

A spore swab involves collecting mushroom spores directly from the gills or pores of a mushroom using a sterile cotton swab _[4]. This method is particularly useful for species that do not produce spore prints easily or for when a more targeted approach is needed, such as when working with rare or difficult-to-cultivate species.

How to Make a Sterile Mushroom Spore Swab at Home

To create a sterile spore swab, follow these steps:

Workspace Preparation: As with spore prints, a clean and controlled environment is essential. Working in a still air box or under a laminar flow hood is recommended to reduce contamination risk _[3].

Sterilisation of Swabs: Use pre-sterilised cotton swabs or sterilise them yourself by wrapping in foil and baking at 160°C (320°F) for an hour. Ensure the swabs remain sterile by only opening the foil wrapping in a sterile environment.

Spore Collection: Gently rub the sterile swab across the gills or pores of the mushroom cap. Care should be taken to collect mushroom spores without damaging the gills, which can compromise the quality of the swab. Immediately place the swab into a sterile container or seal it in a zip-lock bag.

Storage: Store the swabs in a cool, dark place until they are ready to be used. It is important to label the container with the species and date of collection to keep track of your specimens.

Uses of Spore Swabs

Spore swabs are highly effective for inoculating agar plates, where the swab is streaked across the surface of the agar to initiate mycelium growth. My own personally preferred method is to soak the swab in H ₂O₂ and insert the whole bud into the agar plate and snip off the excess to effectively seal your agar dish. This method is particularly useful for isolating pure strains, as it allows for the selection of healthy mycelium free from contaminants. Swabs can also be used to directly inoculate substrates, although this approach is less common due to the higher risk of contamination compared to using a spore syringe.

Comparing Mushroom Spore Prints, Swabs, and Syringes

Choosing the right type of spore collection

Each method of spore collection and utilisation has its own advantages:

Spore prints are ideal for long-term storage and provide a visual method for identifying species. They are also a versatile starting material for creating other spore products.

Spore syringes are useful for species that do not print well or when working with limited material. They are effective for initiating agar cultures and isolating pure strains.

Spore swabs offer a user-friendly approach for substrate inoculation, allowing for precise control over spore distribution. They can be stored for longer periods, than say, liquid cultures, but the downside is slower colonisation.

By mastering the techniques for creating sterile mushroom spore prints, swabs, and syringes, you can significantly enhance the success of growing your own mushrooms. These methods will provide you with tools to explore the fascinating world of fungi. Why not give it a try and blast your skills into the next universe?

So where can I get quality Mushroom Spore Syringes and Swabs?

Premium sterilised Spore Syringes and Swabs available now

Right here. We provide Spore Syringes sterilised in an ISO 5 rated environment and rare, contaminant-free Spore Swabs honed and ready to go! Yes - it might be a brazen product push but I also happen to believe it to be a worthy one.. and so do thousands of others. Take a look for yourself.

★★★★★ Fantastic yet again fungi myco delivers again and again.

- Lee on 1st September 2024